0B5500 BORING MILLS, HORIZONTAL, TABLE TYPE
4", CINCINNATI GILBERT NEW 1985, 48" VERT., 60" CROSS, BALL SCREWS, 50 TAPER Our reference: 8427

Click on picture below for larger version

NEW IN 1985
MODEL: SERIES 4CDT (RIGID TAPPING)


SPECIFICATIONS:

SPINDLE DIAMETER...................... 4"
CONTINIOUS FEED TO SPINDLE............ 29"
TAPER HOLE IN SPINDLE................. #50
VERTICAL TRAVEL....................... 48"
CROSS TRAVEL.......................... 60"
SADDLE TRAVEL......................... 70"

WORKING SURFACE OF TABLE.............. 48" X 72"
NUMBER OF T-SLOTS..................... 7
SIZE OF T-SLOT........................ 1 1/16"

SADDLE WIDTH.......................... 36"
SADDLE TRAVEL ON BED - MAXIMUM........ 70"
- MINIMUM........ 1"
SPINDLE SPEED
(INFINATLY VARIABLE, 3 GEAR RANGES).. 7 - 1510 RPM
ALL SPINDLE & AXIS FEEDS
(INFINATLY VARIABLE)................. .5 - 100 IPM
RAPID TRAVERSE RATE................... 200 IPM
MAIN DRIVE MOTOR...................... 20 HP AC
ELECTRICS............................. 230/3/60

FEATURES & EQUIPMENT:

3-AXIS SONY DIGITAL READOUTS
PROGRAMABLE ENCODED RIDGID TAPPING
3-AXIS BALL SCREWS
AUTOMATIC LUBRICATION OF ALL WAYS
CENTRALIZED LUBRICATION
HARDENED AND GROUND REPLACEABLE WAYS ON BOTH BED AND SADDLE
WAY COVERS FOR SADDLE WAYS ATTACHED TO TABLE
WAY COVERS FOR FRONT OF MACHINE BED COVERING CENTER
FULL PENDANT CONTROL ON & PENDANT BOOM
POWER DRAWBAR AND TOOL EJECTOR
FULL FLOOD COOLANT SYSTEM - PENDANT CONTROLLED WITH PUMP PIPING &

RETURN TROUGHS


UNDER POWER FOR INSPECTION "AS IS, WHERE IS" NORTHEASTERN OHIO

Return to Menu (Use your BACK function to return to previous screen.)