0G8500 GRINDERS, TOOL & CUTTER
WARD TOOL & CUTTER GRINDER CSG4VFS, #40 TAPER WORK HEAD, 220 VOLTS, UNDER POWER Our reference: 8322

Click on picture below for larger version

S/N: 798

SPECIFICATIONS:
Capacity:
Grinds Cutters up to - diameter: 8 1/2"
Grinds Cutters up to - length (variable according to helix) 12"
Distance between Tailstock & Spiral Head: 17"
Distance of Spindle to top of table: Max. 12 1/2"
Min. 2 1/2"

Wheel Spindle:
Two taper roller bearings 1" gamet at wheel end, roller bearing at pulley end.

Pulley is mounted on two prepacked ball races running outside of the

wheelhead. Drive to spindle is through a resilient drive, eliminates direct

belt pull on the spindle.
3-Speed Wheelhead: (Std. 1 1/4" I.D.)
7" O.D. Wheel - 3450 RPM
3" O.D. Wheel - 7200 RPM
2" O.D. Wheel -10000 RPM
Belt Drive is Poly V-belt on 3-speed pulley: 3 HP
Motor Drive V-Belt
Lubrication oil mist from sight reservoir
Vertical Adjustment of wheelhead on column: 10"

Swivel Work Table:
Pre-loaded cross roller table bearings give exceptional rigid and free running

table.
Table Work Surface: 6 3/4" wide x 39" long
Longitudinal Travel (by rack and pinion): 18"
Cross travel on 7" wide gib: 8 1/2"
Swivel table assembly 40 Deg. left 100 Deg. right -
A total of 140 Deg.
Swivel cross slide trunnion diameter: 8 3/4"
Compound table fitted, swivels 15 Deg. each way

Spiral Head:
Cutter helix is generated from sine bar setting with spiral drive being

produced by rack and pinion, any helix right or left hand 0 - 90 degrees can

be produced, index plates provide accurate flute spacing and head tilts to

produce tapers.

Taper in Spiral Head:
Standard #40 Int.
Center Height: 4 1/4"
Tilting: up - 30 Deg.
down - 15 Deg.
Index Plates - divisions: 2 to 24
Radial degree scale with vernier fitted to both size spiral heads to provide

accurate setting of helix.

Aprox Length 5'6"
Aprox Width 3'6"
Aprox Height 5'8"
Net weight approx. 880 Lbs.

Equipped with:
Misc Holders & Index Plates
Set of Centers
Misc. Documentation & Manuals

F.O.B. Ohio

Return to Menu (Use your BACK function to return to previous screen.)