CAPACITY
SWING OVER TABLE DIAMETER 10"
LENGTH BETWEEN RIGHT AND LEFT TAILSTOCKS 27"
lENGTH BETWEEN tAILSTOCK AND WORKHEAD 21-1/2"
FACE MILLS USING FACE MILL GRINDING ATTACHED DIA 18"
SAWS ON TABLE DIAMETER 48"
FORMED CUTTERS (USING 6" WHEEL) DIAMETER 10"
RANGE
TABLE SIZE 6"X36"
LONGITUDINAL TABLE TRAVEL 16"
CROSS MOVEMENT OF TABLE 10"
TABLE SWIVEL 180 DEG.
TABLE TAPER PER FOOT ON DIAMETER 5"
FINE ADJ. TAPER PER FEET ON DIAMETER 2"
TABLE GRADUATIONS IN CENTER 90 DEGREES
VERTICAL MOVEMENT OF GRINDING WHEEL SPINDLE 10-1/2"
MAX. DISTANT CENTERLINE OF SPINDLE TO TABLE 13-1/2"
SPINDLE TILTS ABOVE AND BELOW CENTER 15 DEGREES
SWIVEL MOVEMENT OF GRINDING WHEEL SPINDLE 360 DEGREES
SPINDLE SPEEDS
6" WHEEL, SURFACE SPEED 6,022 FT. /MIN. 3,834 RPM
3" WHEEL, SURFACE SPEED 5,887 FT./MIN 6,425 RPM
APPROX. DIMENSIONS 56" X 68 X 60"H
APPROX. WEIGHT 3,000 LBS
FEATURES:
TILTING WHEELHEAD (15 DEG. ABOVE AND BELOW),
DUPLICATE CONTROLS AT THE FRONT AND REAR OF TABLE
BALL BEARING ANTI-FRICTION TABLE ROLLING IN REPLACEABLE HARDENED STEEL V WAYS
360 DEG. ECCENTRIC WHEELHEAD AND SWIVEL TABLE WHICH CAN INCREASE
SPECIFIED CROSS RANGE BY 70%
CAST IRON CONSTRUCTION
ONE SHOT LUBRICANT SYSTEM
2 SPEED SPINDLE
INSTANTLY REVERSIBLE
1 HP, 3/60/230/460
VOLT SPINDLE MOTOR PRESENTLY WIRED FOR 3/60/220 VOLTS
EQUIPPED WITH:
SET OF CENTERS
MANUAL WORKHEAD
F.O.B. OHIO
Return to Menu
(Use your BACK function to return to previous screen.)
