0L2150 LATHES, COMBINATION, N/C & CNC
CITIZEN CINCOM MODEL F25 SWISS TYPE CNC TURNING CENTER Our reference: 8022

Click on picture below for larger version

YEAR: 1986

SPECIFICATIONS:

MAX. MACHINING DIAMETER .98"
NOTE: THE FINGERS OF THE AUTOMATIC BAR FEEDER CAN DIRECTLY

GRIP A BLANK UP TO THE MAXIMUM MACHINING DIAMETER.
A BLANK LENGTH OVER 200 MM CAN BE MACHINED BY

RECHUCKING, USING OPTIONAL DEVICE SEPERATELY PROVIDED.
MAX. MACHINING LENGTH 7.87" CHUCK
MAX. DRILLING DIAMETER .47"
MAX. TAPPING DIAMETER (TAP AND DIE) M10
SPINDLE THROUGH HOLE DIAMETER 1.50"
SPINDLE SPEED 7000 RPM
NO. OF SPINDLE SPEED CHANGE STEPS STEPLESS
(S4-DIGIT DIRECT DESIGNATION)
TOOL SPINDLE SPEED:
HIGH-SPEED DRIVE UNIT FOR THE NO. 2 TURRET SIDE 1000-5000 RPM
LOW-SPEED DRIVE UNIT FOR THE NO. 1 TURRET SIDE 200-3000 RPM
NO. OF TOOL SPINDLE SPEED CHANGE STEP STEPLESS
(S4-DIGIT DIRECT DESIGNATION)
NOTE: THE LOW-SPEED DRIVE UNIT GENERATES A SPINDLE SPEED OF

3/5 OF A COMMAND VALUE.
TOOL SPINDLE DRIVE SYSTEM INDEPENDENT
DRIVE UNIT SYSTEM
CHUCK AND BUSHING TYPES USED:
SPINDLE COLLET CHUCK FC071
GUIDE BUSHING FG521
DRILL COLLET CHUCK FC090
FCD08
NOTE: THE SPINDLE COLLET AND GUIDE BUSHING ARE COMMON TO

THOS USED FOR OUR F-25 NC AUTOMATIC MACHINE (OLD

MODEL)
THE DRILL COLLET IS COMMON TO THOS USED FOR OUR E-32

AND OLD F-25 NC AUTOMATIC MACHINE (OLD MODEL)
NO. OF TOOLS MOUNTED 10 (5-STATION TURRET X 2)
NOTE: THE NUMBER OF TOOLS MOUNTED CAN BE INCREASED BY USING

A DOUBLE SLEEVE HOLDER.
THE TOOL SPINDLE CAN BE MOUNTED TO EITHER NO. 1 OR NO.

2.
TOOL SIZE 3/8" X 3/8" X 2 3/8"
KINDS OF TOOL SPINDLES:
CROSS DRILL, CROSS TAP, END DRILL, CROSS MILLING AND SLITTING
MAX. WORKPIECE DIAMETER FOR SECONDARY MACHINING 1"
1.26"
TOOL POST STROKE
X-AXIS 8.27"
Z-AXIS 10.43"
RAPID TRAVERSE RATE
X- AND Z-AXIS 328.0"/MIN
C-AXIS 50 RPM


LEAST INPUT INCREMENT:
X-AXIS 0.00004" (DIAMETER DESIGNATION)
Z-AXIS 0.00004"
C-AXIS 0.001 DEGREE (SPINDLE ROTATION ANGLE CONTROL)





SPINDLE INDEXING ANGLE 1 DEGREE
BAR LENGTH 12'
NOTE: THE MINIMUM LENGTH OF A REMAINING BAR IS 9.05"
CENTER HEIGHT 3.4' (INCLUDING A MOUNT HEIGHT)
MOTORS:
FOR SPINDLE DRIVE 3.7 KW (5.5KW, 30-MINUTE RATING)
(FANUC AC SPINDLE MOTOR MODEL 3)
FOR TOOL SPINDLE DRIVE (HIGH SPEED) 0.4KW AC
FOR TOOL SPINDLE DRIVE (LOW SPEED 0.4KW AC
FOR COOLANT 0.25KW AC
FOR HYDRAULIC UNIT 0.75 KW AC
FOR LUBRICATING OIL 0.003KW AC X 2
FOR TOOL POST FEED FANUC DC SERVO MOTOR MODEL 5M X 2
FOR C AXIS CONTROL FANUC DC SERVO MOTOR MODEL 00M X 1



REQUIRED FLOOR SPACE 6.6 X 19.7'
WEIGHT 6600 LB

STANDARD ACCESSORIES:

SYNCHRONOUS TYPE ROTARY GUIDE BUSHING UNIT
CHUCKING DEVICE
ROTARY GUIDE BUSHING DRIVE UNIT


EQUIPPED WITH:

FANUC 10T CONTROL
CINCOM SINGLE 12' BAR FEEDER
THIS MACHINE WILL BE FITTED WITH AN EXCELLENT COMPLIMENT OF TOOLS

INCLUDING CROSS DRILL, CROSS TAP, AND CROSS MILLING HEADS.

Return to Menu (Use your BACK function to return to previous screen.)