0R5603 ROLLS,PLATE BEND'G,INIT.& DBL.PINCH TYPE(Incl.Sheet Mtl.)
13' X 1/4" MG, 4 ROLL DBL PINCH PLATE BNDG ROLL, FULLY HYDRAULIC, MODEL MH4066P Our reference: 4164

Model: MH4066P

THIS MACHINE CAN ROLL DOWN TO 1.1 TIMES THE TOP ROLL DIAMETER WHEN ROLLING AT

FULL LENGTH AND 60% THE RATED CAPACITY.


CAPACITIES:
Useful Length ....................................... 161"
Rolling Thickness ................................... 1/4"
Initial Pinch Pre-bending Thickness ................. .157"

Capacity is based on A36 steel plate with a yield rating of 36,000 PSI.
Performances are rated for standard working diameter 3 times top roll.


TECHNICAL DATA:
Top Roll Diameter ................................... 9.6"
Lower Central Roll Diameter ......................... 9.1"
Side Rolls .......................................... 7.1"
Electric Power (Energy Saving) ...................... 7.25 HP
Length .............................................. 215"
Width ............................................... 47.6"
Height .............................................. 52"
Working Height ...................................... 34.3"
Weight (approx.) .................................... 16,280 LBS.
Electrics (Maximum Line Voltage) .................... 380/50HZ/3PH
or per your specifications

The machine offered will be manufactured using the following technology:

A. AAC-AUTOMATIC ADJUSTMENT FOR CONE - Constant parallel leveling control of

movable rolls by MASSIVE MECHANICAL TORSION SHAFTS without any of the
adjustments and re-balancing required by hydraulic leveling systems.

B. APM-ALL PLANETARY MOVEMENTS - Eliminating all friction common to vertical,
diagonal or horizontal sliding guide systems and requiring absolutely no

adjustment.

C. PERMANENT LUBE SYSTEM - No more ordinary greasing and lubrication for all

the life of the machine by specially protected screened and full-life pre-
greased components.

D. Replacement of all low efficiency components (reduction unit, high friction
bronze bushings, mechanical drives, gears, belts joined arms, sliding

guides, etc.) by new high energy efficiency drives (planetary gears DIRECT

DRIVE COUPLED to the rolls, bearings, central multi-way Electro/hydraulic

power motor) keeping the real force available on the plate to bend

(positive power) Energy saving system conforms to the "International High
Efficiency and Anti-Pollution" rules and standards.


FEATURES:

All steel structural welded frame construction (often no foundation required)

Hydraulic drives with infinitely variable speeds automatically adjusted by

progressive controls (hydroelectric valve machines excluded)

Plate is driven by high-energy efficiency hydraulic motor/planetary drive

eliminating secondary reduction gears, chains, synchronization devices and

clutches.

Instantaneous drive stop of rolls by hydraulic over-center valves

Side-forming rolls controlled by hydraulic cylinders with infinitely variable

speed (hydroelectric valve machines excluded)

Automatically controlled side roll parallelism mechanical controlled by

"TORSION BAR SHAFTS"

Pinch pressure adjustable by exclusive valve allowing automatic clamping of

any size plate

Hydraulic powered drop end

Automatic balancing of top roll (to open the machine)

All rolls mounted on RIV/SKF SPECIAL floating 2 crowns rolls bearings with

automatic self-alignment

Pinching rolls are cambered to compensate for deflection and to increase the

driving and gripping power of the two central rolls.

Fully hydraulic powered movements

Pre-bend and roll in only one pass

One only operator required


STANDARD EQUIPMENT:

Compact hydraulic power unit including hydraulic valves and flexible hydraulic

hoses

Electric control cabinet including overload protection for electric motor,

electric fuses, electric contacts, electric relays and security key=lock door

Special front/pivoting operators console including progressive hydraulic

controls for all machine

Hydraulic machine opening to extract finished cylinders

Multi-system emergency safety device for instantaneous stopping of all

movements.

Back-side roll for immediate positive squaring of plates (4 roll only)

Emergency lowering handles to manually lower the side rolls

Calibration lever cuts oil flow to lower roll for re-rolling cylinders

NOTE: Rolling metal is unique in that you are typically working with a great

many variables. In the normal rolling process, light material, relative to a

machine's full capacity, may require shimming to avoid having an hourglass

defect. Heavy material may require shimming to avoid a barrel defect. These

two situations exist on all rolls at either extreme of their capacity.


PRICE: $88,800.00 (oil not included)

Above price includes below options

OPTIONS: Hardened Rolls Included in above price
LED Readouts (2) Included in above price
Cone Bending Attachment Included in above price

Hydrolyzed tilting of the two outboard rolls and hydraulic declination of the

two lower central rolls from the control panel for producing cones.


DELIVERY: 3-4 months after receipt of order and deposit FOB N.J.

Not CMF nor MG shall not be responsible for delay of performance resulting

from Force Majeure, including acts of war, compliance with governmental laws

and regulations, acts of God and labor disputes, including strikes.


TERMS: 20% down with order, balance irrevocable L/C.

OFFER VALID FOR 30 DAYS

GUARANTEE: Twelve months from date of receipt of machine for the repair or

replacement, at the manufacturer's option, of defective parts at no charge

F.O.B. Simi Valley, CA and the return of the defective parts freight prepaid

to Simi Valley, CA 30 days from date of shipment. This does not include

labor. All electrical items carry the warranty of the manufacturer from whom

they were purchased, which on some items is 30 days. No reimbursement will be

made for repairs of any kind unless prior authorization is given. Urgency

will not be accepted as an excuse.

NOTE: This quotation subject to all applicable taxes. All clerical errors

subject to correction. All machines subject to prior sale. CMF, Inc.

reserves the right to make product design and engineering changes without

notice. Such changes may affect individual machine specifications,

dimensions, capacities and other factors.

*** See attached Warranty, Terms, Machine Use & Safety.
*** These specifications are subject to verification upon inspection.

Return to Menu (Use your BACK function to return to previous screen.)