Subscribe to RSS

Thursday, September 02, 2010

0L3000 LATHES, ENGINE_See also other Lathe Categories
14" x 40" cc, KENT ENGINE LATHE, NO. KLS-1440 **NEW** Our reference: 4565

MODEL: KLS-1440

Swing over bed: 14" (356 mm)
Swing over cross slide: 8-5/8" (220 mm)
Swing over gap: 20" (506 mm)
Width of bed: 8 1/8" (206 mm)
Distance between centers: 40" (1000 mm)
Cross slide travel: 7" (180 mm)
Top slide travel: 4" (100 mm)
Spindle speeds: 16 speeds (2 ranges)
Spindle speed range: 45-1800 RPM
Through hole diameter: 1-1/2" (38 mm)
Spindle nose: D1-4 camlock
Spindle bore taper: MT #5
Standard (Whit-worth): 40 (4-112) TPI
Metric pitch: 22 (0.45-7.5) MM
Longitudinal feeds: 0.0012"-0.0294" IN/REV
Cross feeds: 0.0004"-0.0108" IN/REV
Leadscrew diameter: 7/8" (22 mm)
Thread pitch: 8 TPI
Quill travel: 4-3/4" (120 mm)
Quill diameter: 1-25/32" (45 mm)
Quill bore taper: MT #3
Main motor: 3 HP (2-speed, 3-phase)
Coolant pump motor: 1/8 HP (3-phase)
Overall dimension: 76" x 29" x 47" (LxWxH)
Packing dimension: 80" x 35" x 61" (LxWxH)
Net weight: 1650 LBS
Gross weight: 1950 LBS

POWER REQUIREMENTS: 220 volts, 60 Hz, 3-phase, 10 Amp.


SPECIAL ACCESSORIES PACKAGE -- INCLUDED WITH LATHE -- NO

EXTRA CHARGE!
3-jaw chuck (6"), 4-jaw chuck (8"), Face plate (12")
Steady rest, Follow rest, 4-position tool post
Coolant system, Full-length splash guard, Worklight
Micro carriage stop, Thread chasing dial
Toolbox with standard tools


OUTSTANDING FEATURES:
3 HP main spindle motor
16 speeds, all geared headstock
Jog button for easy gear changes
Hardened and ground gears and bedways
Cast iron machine bedways and base
Removable chip pan for easy clean up
Foot brake and T-Slot compound Inch/metric reading on dials
Inch/metric ruler on tailstock quill
ISO 9001 certified manufacturer


OPTIONS AND ACCESSORIES:
Acu-Rite 200S DRO (2-axis, x=0.0001"/z=0.0002" res)

=$1,980.00
Mitutoyo DRO (2-axis, x=0.0002"/z=0.0005" res) $1,450.00
DRO installation charge $250.00
Aloris BXA #2-BS set (tool post plus 4 bars) $700.00
5C lever style collet closer $800.00
Royal spindle type live center $325.00
Live center set with interchangeable tips $200.00
BTC 3-jaw chuck w/back plate (Zero-set, 6" D1-4) $725.00
BTC 3-jaw chuck w/back plate (Zero-set, 8" D1-4) $800.00
Transformer for 440v power (3 KVA) $500.00
3HP Phase converter for single phase power (rotary-type)

$650.00
Prolong Ultra-Cut coolant (2.5 gallon, mixes 1:30) $150.00
Prolong Anti-Friction lubricant (1 quart, mixes 1:10)

$35.00

*Please note: Installed options may require a deposit,

which is non-cancelable and non-refundable.

Return to Menu (Use your BACK function to return to previous screen.)