Subscribe to RSS

Thursday, September 02, 2010

0L3000 LATHES, ENGINE_See also other Lathe Categories
16" x 40" cc, KENT, RML-1640T **NEW** Our reference: 2593

MODEL: RML-1640T

Swing over bed: 16-3/16" (410 mm)
Swing over cross slide: 10-3/8" (264 mm)
Swing over gap: 23" (584 mm)
Width of bed: 10-1/4" (260 mm)
Distance between centers: 40" (1000 mm)
Cross slide travel: 8-11/16" (220 mm)
Top slide travel: 5-1/2" (140 mm)
Spindle speeds: 12 steps
Spindle speed range: 36-1800 RPM
Through hole diameter: 2-1/16" (52.5 mm)
Spindle nose: D1-6 camlock
Spindle bore taper: MT #6
Standard (Whit-worth): 45 (2-72) TPI
Metric pitch: 39 (0.2-14) MM
Module (mm): 18 (0.3-3.5)
Diametrical: 21 (8-44) DP
Longitudinal feeds: 0.002"-0.067" IN/REV
Cross feeds: 0.001"-0.034" IN/REV
Leadscrew diameter: 4/5" (20 mm)
Thread pitch: 4 TPI
Quill travel: 6" (155 mm)
Quill diameter: 2" (52 mm)
Quill bore taper: MT #4
Main motor: 5 HP (3-phase, 220/440V)
Coolant pump motor: 1/8 HP (3-phase)
Overall dimension: 81" x 38" x 62" (LxWxH)
Packing dimension: 87" x 42" x 66" (LxWxH)
Net weight: 3520 LBS
Gross weight: 3960 LBS


EQUIPPED WITH THE FOLLOWING FREE PROMOTION TOOLING PACKAGE:
3-jaw chuck (9"), Chuck cover, Steady rest, Follow rest, 4-

position tool post, Coolant system, Full-length splashguard,

Halogen work light, Carriage stop, Thread chasing dial,

Toolbox with standard tools


OUTSTANDING FEATURES:
* 5 HP main spindle motor
* 36-1800, 12 steps spindle speeds
* Hardened and ground gears and bedways
* Cast iron machine bedways w/full onepiece cast base and

front pull-out chip tray for easier cleaning
* Foot brake and T-Slot compound Inch/metric reading on

dials
* Inch/metric ruler on tailstock quill
* ISO 9001 certified manufacturer

OPTIONS AND ACCESSORIES:
Acu-Rite 200T DRO (2-axis, x=0.0001"/z=0.0002"res)

*$2240.00
DRO Installation $250.00
Aloris CXA #3-Set (tool post plus 6 holders) $1075.00
Micro Carriage Stop $350.00
Royal 5C lever style collet closer $1145.00
Royal spindle type live center *$500.00
BTC 3-jaw chuck (Zero-set, 8" D1-6) $800.00
BTC 3-jaw chuck (Zero-set, 10" D1-6) $1155.00
4-jaw independent chuck (10" D1-6) $650.00
Taper turning attachment *$1295.00
Face plate (12" D1-6) $650.00
Prolong Ultra-cut coolant (2.5 gal, mixes 1:30) $150.00

*Please note: Installed options may require a deposit;

which is non-cancelable and non-refundable.


POWER REQUIREMENTS: 220/440 volts, 60 Hz, 3-phase, 17/8.5

Amp.

Return to Menu (Use your BACK function to return to previous screen.)