0B1804 BENDERS, PIPE, TUBE & BAR
2-1/4" PINES #25T, 2-1/4" x .065" Tube Cap., Vertical, 30 HP Motor, Hydraulic Pump, 1969 Our reference: 1284

UTUBE NUMBER: 1284
MANUFACTURER: PINES
MODEL NUMBER: 25T
SERIAL NUMBER: 45246-69196
AGE: 1969

SPECIFICATIONS:
Tube Capacity: 2-1/4" x .065"

Bends Per Hour: 700 - 900 (Per Catalogue)
(1) Upper Cylinder: 3-1/2" Bore x 15-1/2" Stroke
Die Cylinders: 24 Tons
(2) Lower Cylinders: 3/4" Bore x 15" Stroke
Work Capacity: 1/2" - 2-1/4" Diameter Mild Steel .065" Wall
Die Platen: Non-Rotating T-Slot: 3-3/4" FB x 3-1/2" RL w/12" Stroke
Wing Platen: Rotating 0 Degrees Horizontal to 90 Degree
Degree of Bend: 165 Degrees Maximum
Center Line of Radius: 6"
Floor to Wing Center: 44-1/2"
Wing Left/Right Adjust.: 6" Each Side via Screw

EQUIPPED WITH:
Fused Disconnect
Complete Electricals (Start/Stop Push Button, Magnetic Motor, Starter
Plus Low Voltage Control Transmission)
BIJUR Lube System
Production Counter
NOTE: Less Foot Pedal and Dial-A-Bend Center Stand.

Main Motor: 30 HP PACEMAKER 230/460/3/60-1760 RPM
Hydrauic Pump: VICKERS, 21 GPM, 1200 RPM, 100 PSI

Overall Dimensions: 7' 3" FB x 3' 2" LR x 8' High
Approximate Weight: 8,800 Lbs.

Return to Menu (Use your BACK function to return to previous screen.)