0L2150 LATHES, COMBINATION, N/C & CNC
EmcoTurn 332MC Plus, Seimens, 2001, 8.6" Swing, 6.3"X, 5.5"Y, 20"Z, Barfeed Our reference: 294270

Click on picture below for larger version

General Specifications As Per Brochure
CNC Control: Siemens 840D
Max. Swing Capacity: 8.6"
Max. Turning Diameter: 5.5"
Cross Slide Travel (X/Y): 6.3"/5.5"
Max. Turning length: 18.9"
Spindle Bore: 1.75
Longitudinal Slide Travel (Z): 20"
Distance between Main & Counter-Spindle:28.3"
Spindle Nose Type (per DIN 55026): A2-4
Diameter of Front Spindle Bearing: 2.76"
Counter-spindle Longitudinal Travel (Z):20"
Counter-spindle Traverse Rate: 945 IPM
Main Spoindle:
AC-drive Motor Output (80% duty cycle): 13 HP
Speed Range (Infinately Variable): 0 - 8,000 RPM
Spindle Torque: 40 Ft LBS
Counter-Spindle:
AC-drive Motor Output (80% duty cycle): 13 HP
Speed Range (Infinately Variable): 0 - 7,000 RPM
Spindle Torque: 33 Ft LBS
Spindle Indexing:
Hydraulic Actuated Programmable Disk
Brake, Division: 0.1"
C-Axis:
Resolution of Circular Axis (360,000) 0.001"
Rapid Traverse Rate (Rotational): 100 IPM
Feed Drives:
Rapid Traverse Rate (Z/X): 945/787 IPM
Feed Force (Z/X): 900/675 Ft LBS
Tooling System (12 station vertical disk turret w/bi-directional indexing)
VDI Quick-change Tool Turret: VDI-25
# of Tool Stations, Each Turret: 12
# of Driven Tool Stations, Each Turret: 12
Driven Tools:
Max. Power: 10 HP
Speed Range: 0 - 6,000 RPM
Hydraulic System Max. Pressure: 750 PSI
Clamping System:
Main Spindle Chuck Diameter: 5"
Counter-Spindle Chuck Diameter: 5"
Collet Chuck Capacity: 1-1/4"
Coolant System:
Coolant Tank Capacity: 66 Gallons
Coolant Pressure: 150 PSI
Electrical System:
Supply Voltage: 208-408 Vac
Spindle Height Above Floor: 46"
Dimensions (approx.): 104" x 80" x 76"
Weight (approx.): 7,615 lbs
Equipped with (must be verified by buyer):
LNS Quickload Servo S2 Magazine Type Barfeed
Chip Conveyor
(10) Livetool Holders & other misc holders
3 Jaw Spindle Noses on each Spindle

Return to Menu (Use your BACK function to return to previous screen.)