0B7015 BRAKES, PRESS, Hydraulic (Tons)
6' x 60 Ton, PRESSMASTER PB-60-6, Hydraulic Press Brake Our reference: 291984

Click on picture below for larger version

General Specifications As Per Brochure

MAXIMUM TONNAGE 60
APPROACH SPEED 70 IPM
PRESSING SPEED 16 IPM
RETURN SPEED 86 IPM
OVERALL BENDING LENGTH 72"
DISTANCE BETWEEN FRAMES 60.5"
THROAT DEPTH 8"
BED HEIGHT 33"
WIDTH OF BED TOP 2.375"
MAXIMUM ADJUSTABLE STROKE 4"
OPEN HEIGHT 11"
CLOSED HEIGHT 7"
HYDRAULIC OIL RESERVE 38 GAL
MOTOR HP @ 1750 5HP
VOLTAGES AVAILABLE: 230/460/575 3 PH 60 HZ
DIMENSIONS: 84" L X 38" D X 84" H
WEIGHT: 6,000 LBS.

STANDARD FEATURES:
- INCLUDES MOTORIZED FRONT OPERATED BACK GAUGE, WITH
READOUT AND FINE HANDWHEEL ADJUSTMENT.
- MOVABLE FOOT PEDAL CONTROL.
- JOG MODE USED FOR SIMPLIFYING SET-UP.
- QUALITY BALDOR MOTOR, LOW SPEED.
- FULLY ENCLOSED CONTROL PANEL COMPLETE WITH LOW VOLTAGE
CONTROL.
- ALL MAJOR PIVOT POINTS AND SLIDES ARE LINED WITH
ZINCALLOY TO PROVIDE HIGH LOAD CAPACITY (60,000 PSI) AND
LOW FRICTION. ZINCALLOY REQUIRES NO LUBRICATION AND WILL
PROVIDE YEARS OF MAINTENANCE-FREE SERVICE. ZINCALLOY IS
WIDELY USING IN MINING APPLICATIONS, LIKE BUSHINGS USED IN
WHEELS OF RAIL CARS HAULING COAL UNDER GROUND IN A DIRTY
ENVIRONMENT - THE PERFECT BEARING SURFACE FOR HARSH
CONDITIONS.
- THE DUAL RAM SPEEDS ARE CONTROLLED THROUGH LIMIT SWITCHES
ALLOWING FOR RAPID RAM MOVEMENT TO POINT OF CONTACT. THE
REMAINDER OF THE RAM TRAVEL IS AT A SLOWER BENDING SPEED.
- THE RAM IS MACHINED TO ACCEPT NORTH AMERICAN STYLE
TOOLING.
- THE BED IS ADJUSTED INSTEAD OF THE RAM TO ALLOW PERFECT
RAM/RAM-GUIDE ALIGNMENT. TILT ADJUSTMENT IS CONVENIENTLY
LOCATED ON THE FRONT OF THE MACHINE.
- THE BED IS DRILLED AND TAPPED TO EASILY ALIGN DIE RAIL
FOR ACCURATE TOOL ALIGNMENT.
- THE FULL LENGTH OF THE BED IS SLOTTED .625" WIDE X .750"
DEEP.
- ALL HYDRAULICS, ELECTRICAL & MECHANICAL PARTS ARE THE
STANDARDS IN THE INDUSTRY, AND AVAILABLE THROUGHOUT NORTH
AMERICA.

Return to Menu (Use your BACK function to return to previous screen.)