0A8175 AUTOMATIC SCREW MACH., SWISS TYPE, N/C & CNC
5/8", CITIZEN, A16, FANUC 0i-T, 2006, 3Rot/5OD/4ID/4BW, 1 Deg Indx, Ikura Mag BF Our reference: 285533

Click on picture below for larger version

GENERAL SPECIFICATION FOR CITIZEN A-16VI

CNC CONTROL: FANUC 0i-T

MAX. MACHINING DIAMETER: .63" (16MM)
MAX. MACHINING LENGTH: 5.31"/2.24" (135MM/62MM)
W/ROTARY GUIDE BUSHING DEVICE

MAX. FRONT DRILLING DIAMETER: .24" (6MM)
MAX. FRONT TAPPING SIZE (W/TAP & DIE): M6
SPINDLE THROUGH-HOLE DIAMETER: .79" (20MM)
MAX. SPINDLE SPEED: 10,000 RPM
W/ROTARY GUIDE BUSHING DEVICE: 6,000 RPM
MAX. DRILLING DIAMETER: .2" (5MM)
ROTARY SPINDLE SPEED: 4,500 RPM
MAX. CHUCK DIAMETER - BACK SPINDLE: .63" (16MM)
MAX. WORKPIECE LENGTH: 3.15" (80MM)
FRONT SIDE FROM BACK SPINDLE
MAX. TAPPING DIAMETER: M3
IN BACK MACHINING PROCESS
BACK SPINDLE SPEED: 6,000 RPM
# OF TOOLS TO BE MOUNTED: 16
TURNING TOOLS ON GANG TOOL POST: 5
ROTARY TOOLS ON GANG TOOL POST: 3
TOOLS FOR FRONT SPINDLE: 4
TOOLS FOR BACK SPINDLE: 4
TOOL SIZE:
GANG TOOL POST (TOOL): .39" (10MM)
SLEEVE: .75" (19.05 MM)
RAPID FEED RATE:
X1/Y1 AXIS: 68.9 FT/MIN
Z1/Z2 AXIS: 49.21 FT/MIN
A2 AXIS: 39.37 FT/MIN
MOTOR:
MAIN SPINDLE: 2.2/3.7 KW
TOOL SPINDLE DRIVE: 0.4 KW
BACK SPINDLE DRIVE: 1.0 KW
CUTTING OIL: 0.18 KW
CENTER HEIGHT: 39.37" (1,000 MM)
INPUT POWER CAPACITY: 4 KVA
AIR PRESSURE & FLOW RATE: 0.5 MPA (10 NI/MIN)
WEIGHT (APPROX.): 2,866 LBS
EQUIPPED WITH (MUST BE VERIFIED BY BUYER):
IKURA SEIKI LUB16
ROTARY GUIDE BUSHING
1 DEGREE INDEXING ON MAIN SPINDLE
MAIN & BACK SPINDLE CHUCKING DEVICE
WORKPIECE SEPARATOR
CHASING DEVICE
COOLANT & LUBRICATION DEVICE (W/LEVEL SENSOR)
MANUAL FEED FUNCTION HANDLE
MAIN SPINDLE SPEED CHANGE DETECTION
CORNER CHAMFERING/ROUNDING
CANNED DRILLING CYCLE
NOSE R COMPENSATION
MAIN SPINDLE CONSTANT SURFACE SPEED

APPROX. 1300 HOURS

Return to Menu (Use your BACK function to return to previous screen.)