0B1120 BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL
New Iemca Master 21 .394" - 3" X 6' Our reference: 272007

ADDITIONAL INFORMATION on this equipment is available as a PDF. Caution: this may be large file.

GENERAL SPECIFICATIONS AS PER BROCHURE

BAR DIAMETER:
ROUND: .315" - 3"
SQUARE: .24" - 2-1/4"
HEX: .275" - 2.5"
MAX. BAR LENGTH: 6'10"
MAGAZINE CAPACITY: 15 LINEAR INCHES
MAX. REMNANT LENGTH: 300MM (12")
OPERATING VOLTAGE: 230 VOLTS/3 PHASE
CONTROL VOLTAGE: 24 DC VOLTS
TOTAL POWER REQUIRED: 2KW (7AMPS)
COMPRESSED AIR REQUIRED: 90 PSI 10 CFM
GUIDE CHANNEL OIL: ISO 150, 4 GAL (NOT INCLUDED)
FEEDING SPEED: 750MM (30") SEC. MAX.
RETURN SPEED: 800MM (31.5") SEC. MAX.
FACING ACCURACY: +/-1 MM (0.040")
BAR CHANGE TIME: 20 SECONDS FOR 6' BAR
WEIGHT (APPROX.): 2,400 LBS
COLOR: RAL 5002 BLUE/RAL7035 LT GRAY
BAR STRAIGHTNESS REQUIREMENT: .5MM/M (.007"/FT.) TIR
BAR STRAIGHTNESS, GUIDE CHANNEL SELECTION, AND PROPER ALIGNMENT AND
ANCHORING OF THE BAR FEEDER WILL ENSURE MAXIMUM OPERATIONAL RPM

EQUIPPED WITH:
LATHE INTERFACE KIT
GUIDE CHANNELS L+21
SPINDLE LINERS
REMNANT RETRACT
AXIAL DISPLACEMENT Z
BUSHING DEVICE
VULKOLLAN BUSHING
BAR PUSHERS
ROTATING TIP
COLLET - BAR STOCK
SHIPPING PALLET

ACCESSORIES:
INSTALLATION......................................$ 2,700.00
ADDITIONAL GUIDE CHANNEL SET 21-46MM..............$ 3,500.00
(ABOVE PRICE INCLUDES SPINDLE LINER, BAR PUSHER & ROTATING TIP (INCLUDED
IN GUIDE CHANNEL)
ADDITIONAL GUIDE CHANNEL SET 52-86MM..............$ 4,500.00
(ABOVE PRICE INCLUDES SPINDLE LINER, BAR PUSHER & ROTATING TIP (INCLUDED
IN GUIDE CHANNEL)
ADDITIONAL SPINDLE LINER..........................$ 580.00 EA
ADDITIONAL BAR STOCK COLLETS UP TO 2" BAR STOCK...$ 85.00 EA
ADDITIONAL BAR STOCK COLLETS 2.125" - 3.125" STOCK$ 140.00 EA

IMPORTANT NOTES:
BAR FEEDER INSTALLATION DOES NOT INCLUDE LATHE-SIDE SOFTWARE OR HARDWARE
INTERFACE. THIS INTERFACE MUST BE SUPPLIED AND INSTALLED BY THE LATHE
OEM OR DEALER PRIOR TO BAR FEEDER INSTALLATION.

THE ANCHORING OF THE IEMCA BAR FEEDER TO THE FLOOR IS A REQUIREMENT AND WILL
BE PERFORMED BY THE IEMCA SERVICE TECHNICIAN.

Return to Menu (Use your BACK function to return to previous screen.)