0B1120 BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL
New Iemca Mini Boss 332 1/8" - 1 1/4"Dia X 12' - Fixed Headstock Our reference: 272006

ADDITIONAL INFORMATION on this equipment is available as a PDF. Caution: this may be large file.

GENERAL SPECIFICATIONS AS PER BROCHURE

BAR SIZE CAPACITY: 3MM - 32MM (1/8" - 1-1/4")
BAR LENGTH CAPACITY: 12'(10' , 14' ARE OPTIONAL)
MAGAZINE MAXIMUM CAPACITY: 10 LINEAR INCHES
TOTAL POWER REQUIRED: 2 HP
OPERATING VOLTAGE: 230 VAC. 3 PHASE, 60 HZ
CONTROL VOLTAGE: 24 VDC
MAX. FEED SPEED: 29.5" PER SECOND
RETURN SPEED: 31" PER SECOND
BAR CHANGE TIME: 25-30 SECONDS FOR 12' BAR
OIL SPECIFICATIONS GUIDE CHANNEL: ISO 100 (NOT INCLUDED)
CAPACITY 40 LITERS (15 GAL)
COMPRESSED AIR: 60 - 80 PSI
COLOR: RAL 5002 BLUE/RAL 7035 LIGHT GRAY
WEIGHT (APPROX.): 1,900 LBS
BAR STRAIGHTNESS REQUIREMENT: .5MM/M (.007"/FT. TIR)
BAR STRAIGHTNESS, GUIDE CHANNEL SELCTION, AND PROPER ALIGNMENT AND
ANCHORING OF THE BAR FEEDER WILL ENSURE MAXIMUM OPERATIONAL RPM)
EQUIPPED WITH:
AUTOMATIC LOADING MAGAZINE
AUTOMATIC REMNANT RETRACTION
PATENTED DOUBLE PUSHER, SPACE SAVING DESIGN
PATENTED QUICK CHANGE, HYDRODYNAMIC, POLYURETHANE GUIDE CHANNEL SYSTEM
SLIDING HEADSTOCK SYNCHRONIZATION
PNEUMATIC FRONT SUPPORT BUSHING DEVICE
USER FRIENDLY HAND-HELD CNC CONTROL ALLOWS EASY BAR FEEDER PARAMETER
CHANGES
EASY TO USE HAND HELD REMOTE CONTROL

(2) QUICK CHANGE GUIDE CHANNEL SETS (SIZES TO BE CHOSEN BY CUSTOMER)
(2) O.D. BAR STOCK COLLETS (TO BE CHOSEN PER BAR DIAMETER)
(2) ELASTIC BUSHINGS FOR PNEUMATIC FRONT SUPPORT (TO BE CHOSEN PER BAR DIA)
(2) TELESCOPIC FRONT NOSES (MATCHING SIZES TO GUIDE CHANNEL SETS)
(1) LATHE SPINDLE LINER (MATCHING SMALLEST GUIDE CHANNEL SET)

ACCESSORIES:
INSTALLATION............................................$ 2,700.00
ADDITIONAL BAR STOCK COLLETS............................$ 55.00 EA
(1 NEEDED FOR EACH SIZE BAR STOCK TO BE RUN)
ADDITIONAL ELASTIC BUSHINGS.............................$ 85.00 EA
(1 NEEDED FOR EACH SIZE BAR STOCK TO BE RUN)
ADDITIONAL SPINDLE LINER................................$ 420.00 EA
(1 NEEDED IF USING 2 GUIDE CHANNEL SETS BOTH BEING LESS THAN LATHE'S
NORMAL CAPACITY SET)
DELETE FOR NON SLIDING HEADSTOCK MACHINE................$ (1,500.00)
DELETE FOR REMOVING (1) EACH:
GUIDE CHANNEL, TELESCOPING NOSE, SPINDLE LINER, COLLET &
ELASTIC BUSHING ...$ ( 840.00)

IMPORTANT NOTES:
BAR FEEDER INSTALLATION DOES NOT INCLUDE LATHE-SIDE SOFTWARE OR HARDWARE
INTERFACE. THIS INTERFACE MUST BE SUPPLIED AND INSTALLED BY THE LATHE OEM
OR DEALER PRIOR TO BAR FEEDER INSTALLATION.

THE ANCHORING OF THE IEMCA BAR FEEDER TO THE FLOOR IS A REQUIREMENT AND
WILL BE PERFORMED BY THE IEMCA SERVICE TECHNICIAN.

Return to Menu (Use your BACK function to return to previous screen.)