0B1120 BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL
New Iemca Boss 551 .187" - 2" DIA. X 12' - Fixed Headstock Our reference: 261125

GENERAL SPECIFICATIONS AS PER BROCHURE

BAR SIZE CAPACITY: =5MM - 51MM (.187" - 2")
BAR LENGTH CAPACITY: =12'(6', 10' , 14' ARE OPTIONAL)
MAGAZINE MAXIMUM CAPACITY: =11 LINEAR INCHES
TOTAL POWER REQUIRED: =2 HP
OPERATING VOLTAGE: =230 VAC. 3 PHASE, 60 HZ
CONTROL VOLTAGE: =24 VDC
MAX. FEED SPEED: =29.5" PER SECOND
RETURN SPEED: =31" PER SECOND
BAR CHANGE TIME: =25-30 SECONDS FOR 12' BAR
OIL SPECIFICATIONS GUIDE CHANNEL: =ISO 150 (NOT INCLUDED)
= = CAPACITY 40 LITERS (15 GAL)
COMPRESSED AIR: =60 - 80 PSI
COLOR: =RAL 5002 BLUE/RAL 7035 LIGHT GRAY
WEIGHT (APPROX.): =2,200 LBS
BAR STRAIGHTNESS REQUIREMENT: =.5MM/M (.007"/FT. TIR)
=BAR STRAIGHTNESS, GUIDE CHANNEL SELCTION, AND PROPER ALIGNMENT AND
=ANCHORING OF THE BAR FEEDER WILL ENSURE MAXIMUM OPERATIONAL RPM)
EQUIPPED WITH:
=AUTOMATIC LOADING MAGAZINE
=AUTOMATIC REMNANT RETRACTION
=PATENTED DOUBLE PUSHER, SPACE SAVING DESIGN
=PATENTED QUICK CHANGE, HYDRODYNAMIC, POLYURETHANE GUIDE CHANNEL SYSTEM
=PNEUMATIC FRONT SUPPORT BUSHING DEVICE
=(1) QUICK CHANGE GUIDE CHANNEL SETS (SIZES TO BE CHOSEN BY CUSTOMER)
=(1) O.D. BAR STOCK COLLETS (TO BE CHOSEN PER BAR DIAMETER)
=(1) ELASTIC BUSHINGS FOR PNEUMATIC FRONT SUPPORT (TO BE CHOSEN PER BAR
DIA)

USER FRIENDLY HAND-HELD CNC CONTROL ALLOWS EASY BAR FEEDER PARAMETER
CHANGES
HAND HELD REMOTE KEYPAD


ACCESSORIES:
=INSTALLATION............................................$ 2,700.00
=ADDITIONAL GUIDE CHANNEL SETS:..........................$ 3,645.00 EA
(ABOVE PRICE INCLUDES (1) LATHE SPINDLE LINER PER GUIDE CHANNEL SET)
ADDITIONAL BAR STOCK COLLETS............................$ 85.00 EA
= (1 NEEDED FOR EACH SIZE BAR STOCK TO BE RUN)
=ADDITIONAL ELASTIC BUSHINGS.............................$ 120.00 EA
= (1 NEEDED FOR EACH SIZE BAR STOCK TO BE RUN)
=ADDITIONAL SPINDLE LINER................................$ 420.00 EA
= (1 NEEDED IF USING 2 GUIDE CHANNEL SETS BOTH BEING LESS THAN LATHE'S
= NORMAL CAPACITY SET)
=ADDITIONAL TELESCOPING NOSE I.D. LINERS.................$ 200.00 EA

=AXIAL MOVEMENT TRACK:...................................$ 2,300.00

IMPORTANT NOTES:+
=BAR FEEDER INSTALLATION DOES NOT INCLUDE LATHE-SIDE SOFTWARE OR HARDWARE
=INTERFACE. THIS INTERFACE MUST BE SUPPLIED AND INSTALLED BY THE LATHE OEM
=OR DEALER PRIOR TO BAR FEEDER INSTALLATION.

=THE ANCHORING OF THE IEMCA BAR FEEDER TO THE FLOOR IS A REQUIREMENT AND
=WILL BE PERFORMED BY THE IEMCA SERVICE TECHNICIAN.

Return to Menu (Use your BACK function to return to previous screen.)